收藏本站
LT1932
APPLICATIO S I FOR ATIO
R PWM SET ? ? MAX – 1 ?
= R
Open-Circuit Protection
For applications where the string of LEDs can be discon-
nected or could potentially become an open circuit, a zener
diode can be added across the LEDs to protect the LT1932
(see Figure 4). If the device is turned on without the LEDs
present, no current feedback signal is provided to the LED
pin. The LT1932 will then switch at its maximum duty
cycle, generating an output voltage 10 to 15 times greater
than the input voltage. Without the zener, the SW pin could
see more than 36V and exceed its maximum rating. The
zener voltage should be larger than the maximum forward
voltage of the LED string.
If the R SET pin is used, increasing the duty cycle will
decrease the brightness. Using this method, the LEDs are
dimmed using R SET and turned off completely using
SHDN. If the R SET pin is used to provide PWM dimming,
the approximate value of R PWM should be (where V MAX is
the “high” value of the PWM signal):
? V ?
? 0 . 15 V ?
In addition to providing the widest dimming range, PWM
brightness control also ensures the “purest” white LED
color over the entire dimming range. The true color of a
V IN
L1
6.8 μ H
D1
white LED changes with operating current, and is the
“purest” white at a specific forward current, usually 15mA
or 20mA. If the LED current is less than or more than this
value, the emitted light becomes more blue. For color
6
V IN
1
SW
24V
LCDs, this often results in a noticeable and undesirable
blue tint to the display.
LT1932
C1
4.7 μ F
5
SHDN
R SET
4
LED
GND
2
3
15mA
C2
1 μ F
When a PWM control signal is used to drive the SHDN pin
of the LT1932 (see Figure 6), the LEDs are turned off and
on at the PWM frequency. The current through them
R SET
1.50k
1932 F04
Figure 4. LED Driver with Open-Circuit Protection
Dimming Using a PWM Signal
PWM brightness control provides the widest dimming
range (greater than 20:1) by pulsing the LEDs on and off
using the control signal. The LEDs operate at either zero or
full current, but their average current changes with the
PWM signal duty cycle. Typically, a 5kHz to 40kHz PWM
signal is used. PWM dimming with the LT1932 can be
accomplished two different ways (see Figure 6). The
SHDN pin can be driven directly or a resistor can be added
to drive the R SET pin.
If the SHDN pin is used, increasing the duty cycle will
increase the LED brightness. Using this method, the LEDs
alternates between full current and zero current, so the
average current changes with duty cycle. This ensures
that when the LEDs are on, they can be driven at the
appropriate current to give the purest white light. Figure
5 shows the LED current when a 5kHz PWM dimming
control signal is used with the LT1932. The LED current
waveform cleanly tracks the PWM control signal with no
delays, so the LED brightness varies linearly with the
PWM duty cycle.
V PWM
2V/DIV
I LED
10mA/DIV
can be dimmed and turned off completely using the same
control signal. A 0% duty cycle signal will turn off the
50 μ s/DIV
1932 F05
LT1932, reducing the total quiescent current to zero.
Figure 5. PWM Dimming Using the SHDN Pin
1932f
7
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
LT1937ES5#TRMPBF IC LED DRIVR WHITE BCKLGT TSOT-5
LT3003EMSE#TRPBF IC LED DRIVER BALLASTER 10-MSOP
LT3465AES6#TRMPBF IC LED DRIVR WHITE BCKLGT TSOT-6
LT3466EDD-1#PBF IC LED DRIVR WHITE BCKLGT 10-DFN
LT3466EDD#PBF IC LED DRIVR WHITE BCKLGT 10-DFN
LT3474IFE#PBF IC LED DRVR HP CONS CURR 16TSSOP
LT3475EFE-1#PBF IC LED DRVR HP CONS CURR 20TSSOP
LT3476EUHF#PBF IC LED DRVR HP CONST CURR 38-QFN
相关代理商/技术参数
LT1932ES6#TRMPBF (CUT REEL) 制造商:Linear Technology 功能描述:
LT1932ES6#TRPBF 功能描述:IC LED DRIVR WHITE BCKLGT TSOT-6 RoHS:是 类别:集成电路 (IC) >> PMIC - LED 驱动器 系列:- 标准包装:6,000 系列:- 恒定电流:- 恒定电压:- 拓扑:开路漏极，PWM 输出数:4 内部驱动器:是 类型 - 主要:LED 闪烁器 类型 - 次要:- 频率:400kHz 电源电压:2.3 V ~ 5.5 V 输出电压:- 安装类型:表面贴装 封装/外壳:8-VFDFN 裸露焊盘 供应商设备封装:8-HVSON 包装:带卷 (TR) 工作温度:-40°C ~ 85°C 其它名称:935286881118PCA9553TK/02-TPCA9553TK/02-T-ND
LT1932ES6TRMPBF 制造商:Linear Technology 功能描述:LED Driver 8-Seg 1.8/2.5/3.3/5/9V TSOT23
LT1933 制造商:LINER 制造商全称:Linear Technology 功能描述:1.4A, 500kHz Step-Down Switching Regulator
LT1933_1 制造商:LINER 制造商全称:Linear Technology 功能描述:600mA, 500kHz Step-Down Switching Regulator in SOT-23 and DFN Packages
LT1933ES6 制造商:Linear Technology 功能描述:Conv DC-DC Single Step Down 3.6V to 36V 6-Pin TSOT-23
LT1933ES6#PBF 制造商:Linear Technology 功能描述:IC STEP-DOWN REGULATOR 6-TSOT-23
LT1933ES6#TR 功能描述:IC REG BUCK ADJ 0.6A TSOT23-6 RoHS:否 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 标准包装:2,500 系列:- 类型:升压（升压） 输出类型:可调式 输出数:1 输出电压:1.24 V ~ 30 V 输入电压:1.5 V ~ 12 V PWM 型:电流模式，混合 频率 - 开关:600kHz 电流 - 输出:500mA 同步整流器:无 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:8-SOIC（0.154"，3.90mm 宽） 包装:带卷 (TR) 供应商设备封装:8-SOIC